Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications.
For 3/4" material
Use in a table mounted router
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Re-spacing of the components should only be necessary -using the shims provided- after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.
?WARNING! For Your Safety 1. The methods illustrated here are only intended for use with a table mounted router. 2. Do not exceed the recommended RPM for each of the bits. 3. Use a miter gauge and clamp when routing the ends of the rails. 4. Use a push block or push stick when routing the door styles. 5. Use a guard at all times. 6. Use eye and hearing protection. 7. Do not use the methods in this set of instructions unless you feel that they are safe for you.
Router Bits shown in video Stile & Rail Router Bits Reversible Stile & Rail Assembly - #55350 2pc Concave Stile & Rail - #55420 & #55421
All 2-Piece stile and rail sets include two complete assemblies consisting of cutters, arbors & bearings.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.