4" x 6" Metal Cutting Bandsaw #15-400 is designed to cut as a horizontal bow saw but will also operate as a vertical bandsaw when a table (included) is installed. Three blade speeds of 80, 120 and 180 feet per minute are ideal for optimizing cut performance in brass alloys up to stainless steel. Miter angle cuts are possible up to 45°. The blade can be fed into the material manually or controlled automatically and hands-free with a spring-assist torsion system. When a cutting operation in completed the saw will automatically shut off.
Motor
- Horsepower: 3/4HP
- Amps: 4.6A
- Volts: 120V, 60Hz, 1PH
- RPM: 1,720
Blade
- Length: 64-1/2" (1638 mm)
- Width: 1/2" (12.7mm)
- Speed: 80/120/180 FPM
Cutting Capacity
- Max Depth of Square Cut @ 90°: 4" x 6" (101 x 152mm)
- Max Depth of Square Cut @ 45°: 2-3/4" (70mm)
- Max Depth of Circular Cut @ 90°: 4-1/2" (114mm)
- Max Depth of Circular Cut @ 45°: 2-3/4" (70mm)
- Cutting Angle: 0-45°
Vertical Table
- Size: 9-5/8" x 9-3/8" (245 x 238 mm)
- Height from Floor: 32-3/4" (832mm)
Overall
- Horizontal Height: 37-1/2" (953 mm)
- Vertical Height: 54" (1,372 mm)
- Width: 37-1/2" (953 mm)
- Depth: 18-1/4" (464 mm)
- Net Weight: 115lbs (52 kg)
- Shipping Weight: 123.5lbs (56 kg)
- Shipping Carton: 41" x 14" x 17-1/2" 1040mm x 360mm x 445mm
- Warranty: 5 Year
Features
- Rugged cast iron bed and frame
- Powerful 3/4 HP, 120V motor
- 4” x 6” Maximum Depth of Square Cut @ 90°
- 4-1/2” Maximum Depth of Circular Cut @ 90°
- Horizontal Table Size (W x D) 9-5/8” x 9-3/8”
- Speed Range 80/120/180 ft/min
- Standard 64-1/2" Blade Length
- Net Weight: 115lbs
Accessories:
- 19-6401 64-1/2” x 1/2” x 0.025" x 14 TPI Bi-Metal Reg Metal Cutting Blade
- 19-6402 64-1/2” x 1/2” x 0.025" x 18 TPI Bi-Metal Reg Metal Cutting Blade
- 19-6403 64-1/2” x 1/2” x 0.025" x 8/12 TPI Bi-Metal Vari Metal Cutting Blade
- 19-6404 64-1/2” x 1/2” x 0.025" x 10/14 TPI Bi-Metal Vari Metal Cutting Blade
- 19-6405 64-1/2” x 1/2” x 0.025" x 14/18 TPI Bi-Metal Vari Metal Cutting Blade
Download Instructions Manual
