The new and improved 10” Bandsaw 10-3061 is a replacement of our previous 10-306 model. Numerous features make this bandsaw extremely easy to operate and make adjustments to the blade, guides and fence. The increased cutting capacity, 2 blade speeds, and increased 1/2HP motor are quite ample enough for smaller projects, and will be appreciated by woodworkers having limited shop space for a larger size bandsaw. Improved features for easy operation – 2 blade speeds, tool-less blade guides, quick-release blade tension lever, tilting 0-45° cast iron table, adjustable rip fence, larger blade tension knob, dust port for shop vacuum hookup, side windows for viewing blade tracking settings, storage hanger for the fence and tools, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand is available separately.
Motor
- Horsepower: 1/2 HP
- Amps: 5.5
- Volts: 115V, 60Hz
- Speed: 1,720 RPM
Cutting Capacity
- Height: 5”
- Width: 9-5/8”
Blade (Includes 5/16” x 6TPI, Regular)
- Width: 1/8” – 1/2”
- Length: 70-1/2”
- 2 Blade Speeds: 1,515/ 3,280 ft/min
Table
- Size: 13-3/4” x 12-1/2”
- Left Tilt: 5°
- Right Tilt: 45°
- Miter Gauge Slot: 5/8” x 1/4”
- Height to Floor (with 13-913 stand): 39-7/8”
- Height to Base: 14-1/2”
- Fence Size: 12-1/4” x 2-3/8”
Overall
- Height:  34-1/4”
- Width: 21”
- Depth: 16-1/4”
- Base Size: 15-7/8” x 9-3/8”
- Dust Port: 2-1/2” O.D., 2-5/16” I.D.
- Net Weight: 77.5 lbs.
- Shipping Weight: 86 lbs.
- Shipping Carton: 35-1/2” x 12-3/4” x 18-1/4”
- Warranty: 5 Years
Features
- 2 blade speeds - 1,515 & 3,280 ft/min
- Tool-less blade guides
- Quick-release blade tension lever
- Easy-adjust rip fence system
- Increased cutting height capacity of 5" with 9-5/8" width
- 2 side windows for safe viewing when blade tracking
- More powerful 1/2 HP motor
- cast iron table with miter gauge slot and 90° and 45° tilt stops
Accessories:
- 12-201 LED Gooseneck Worklight with Magnetic Base and Magnetic Clip
- 13-913 Optional 10” Bandsaw Stand. Top: 14-1/2” x 9-3/4”, Base: 25” x 18-3/4”, Height: 25”
- 13-920 Miter Gauge Aluminum body with 60° scale for left and right settings
- C10-109 Replacement Guide Bearings Pack of 6
- C10-393 Replacement Table Inserts Pack of 4
- C10-394 Zero Clearance Inserts Pack of 4
- C10-405 10″ Rubber Wheel Tire
- C10-990 Drive Belt
- 19-7006 Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .025 Gauge. There are 8 teeth per inch in a regular tooth configuration.
- 19-7007 Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .018 Gauge. There are 14 teeth per inch in a hook tooth configuration.
- 19-7002 Bandsaw Blade 70-1/2″ in length and 3/16″ wide with .025 Gauge. There are 10 teeth per inch in a regular tooth configuration.
- 19-7003 Bandsaw Blade 70-1/2″ in length and 1/4″ wide with .025 Gauge. There are 6 teeth per inch in a regular tooth configuration.
- 19-7004 Bandsaw Blade 70-1/2″ in length and 3/8″ wide with .025 Gauge. There are 4 teeth per inch in a skip tooth configuration.
- 19-7005 Bandsaw Blade 70-1/2″ in length and 1/2″ wide with .025 Gauge. There are 3 teeth per inch in a hook tooth configuration.