Guitar Fingerboard Radiusing 12 Inch Radius Router Bits

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  Excellent for Guitar Making Luthier Markers!

  These Amana Tool® Guitar Fingerboard Radiusing Router Bit are designed to add radius to your guitar fretboard, with a 12” radiused cutting height of 1-7/8” for fretboards up to 3-3/4 wide. Affix the fingerboard to the planed and squared backing stock of the same width, using double faced tape.

  • Industrial quality
  • Carbide tipped
  • Designed for fretboards up to 3-3/4" wide 

  Adjust the fence to be flush with the bearing, then proceed to route as described below.

  First Pass: Line up the top of the blade with the center of the stock to route the first half of the radius.

  Second Pass: Flip the stock assembly along the length and route the second side to complete the radius.

  Whether you favor building acoustics or electrics. No matter if you’re plunging a recess for a pickup, creating a neck pocket, cutting in binding and purfling, or routing for a rosette, Amana Tool® has the guitarmaking luthier router bits you need. You can be assured that Amana pours the same level of passion, quality and commitment into its tools that you put into your guitars.

• Reviews
• Questions and Answers
• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.