PRODUCT DETAILS
Click an item to expand and learn more
-
The Amana Tool® 3D adapters are versatile devices used for making compound curves by inserting the adapter over any 1/4" shank router bit. By making it as an adapter and not a solid tool, the system becomes much more flexible as well as cost effective.
Tool #55110 can be used with Amana #'s 49492, 49496, MR0101, MR0100, MR0105, MR0102, MR0103, MR0104, MR1010, MR1004, MR0106, MR0107, MR0108, MRR108, MR0110, MR0112, MR0114, MRR110 and MR1020.
Insert #55110 adapter over any tool with 1/4" shank up to the maximum diameter of the adapter. For example, tool no. 55110 will fit all tools with up to a 3/4" cutting diameter. The cutting length is adjustable and is limitless to shapes and tools this adapter may be used for.
Each 3D Adapter comes with 2 Allen Keys:- 5009 – 1/8” Allen Key for the screw on the side
- 5003 – 5/32” Allen Key
Use to set screw M8" inside the shank of the tool. This screw makes it easier to adjust the length accurately and safely.
Use Amana Tool Allen key #5003 (5/32") to adjust the required length of the shank. Only then, you can tighten the set screw that holds the tool from the side. -
-
-
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
