Double Edge Folding V Groove with Flat Bottom Insert Router Bits for Shaping Aluminum Composite Material (ACM) Panels

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  Max RPM: 18,000.
  
  

  Tool No.	Special Knives for ACM materials & thin aluminum (included)	General Purpose knives (optional)	MDF knives (optional)	Torx® Screw	Torx® Key
  RC-45714	RCK-456 (4 sided with flat tips)	-	-	67312	5005
  RC-45716	RCK-456 (4 sided with flat tips)	-	-	67312	5005
  RC-1172	RCK-442 (2 sided)	-	-	67117	5005
  RC-1175	RCK-444 (2 sided)	RCK-119 (V groove)	RCK-352 (V Groove)	67117	5005
  RC-1177	RCK-446 (1 sided)	RCK-136 (V groove)	RCK-353 (V groove)	67139	5005

  Single and 2 Flute
  
  Insert knives are specially ground with flat tips. Ideal for wall panel fabrication.
  
  Optional MDF and general purpose knives available.

  Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.

  • Acetate
  • Aluminum, Clay, Zinc & Wood Composite Panels
  • Aluminium Composite Materials (ACM)
  • Aluminium Composite Panel (ACP)*
  • ALPOLIC® Copper Composite Material (CCM)
  • Alucobond®
  • Alupanel®

  • Bakelite
  • Dibond®
  • Durabond***
  • e-panel™
  • Etalbond®
  • Nylon
  • PE and FR Cores
  • Phenolics

  • Plastic/Acrylic
  • Plexiglas®
  • PVC
  • Steel Composite Material (SCM)
  • Titanium Composite Material (TCM)
  • Wood

  *Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminium sheets bonded to a non-aluminium core and is widely used as cladding for many diverse applications such as interior and exterior office buildings, external cladding or facades of buildings, hospitals, convention centers, airports, hotels, insulation and signage. ***Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.

  Specially designed router bits are used to route V-grooves in the above materials to allow easy bending without cracking the bent area. Route within 0.8mm from the bottom of the composite panel to achieve a clean bend/radius. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.
• Reviews
• Questions and Answers
• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.