D36x1,4m-AS/CTR Suction hose
For CT 26 to 48, SV-AS D50 SWT, CT-ASA FLX J/W
Functions
The extension for your suction hose. The practical hose section allows you to extend the standard hose by 1.4 m when working with the extraction arm. You can also use the extension hose as a connector between the Y-valve on the MFT and the suction cup. Or as a short hose between the KAPEX and the suction cup, for example, if you are working semi-stationary. Short. Practical. Better.
- Flexible rubber sleeve: Connects extension piece and additional D27/32 suction hose or Y-valve securely together.
- Robust: The smooth outer skin prevents the suction hose from snagging.
- For extending the smooth D27/32 standard suction hose
- For connecting the Y-valve or a semi-stationary machine
- Antistatic
Technical data
- Diameter: 36 mm
- Length: 1.40 m
- Bleeder resistor (DIN IEC 312): <1 MΩ/m
Key Features
Useful extension. For extending the smooth D27/32 standard suction hose when working with the CT-ASA FLX. This gives you even more flexibility when using your extraction arm.
Secure connection. Flexible rubber sleeve securely connects extension piece and additional D27/32 suction hose or Y-valve.
Intermediate piece. The 1.4 m extension piece serves as a connecting hose between the suction cup and Y-valve on the MFT.
Short and practical. Short hose for connecting a semi-stationary machine, e.g. KAPEX cross-cut saw. So there is not much hose in the way.
Smooth exterior. Robust, smooth outer skin prevents the suction hose from getting caught.
Uses
- Extension of the smooth D27/32 standard suction hose.
- Connecting the Y-valve for use on the MFT.
- Extraction from semi-stationary machines such as KAPEX.
- Providing additional reach and flexibility when working with an extraction arm.
Free Shipping
