Armed with a powerful 14 amp CUprex Compact motor and performance-optimized digital electronics, Mafell's K65cc circular saw makes quick work of even the hardest woods up to 2-5/8” deep (67mm). Bright LEDs highlight a sizeable work area when the switch trigger is pulled, a red pointer marks the exact cutting line when off a track (even during a bevel cut), and the front of the saw features an ergonomic second handle. The standard Rip Fence (or Roller Edge Guide accessory) can be used on either side of the saw for straight cuts or as outrigger support (such as during a bevel cut).
Heavy table saws beware the competitive portability of the K65cc! The saw maintains excellent cutting depth on the lightweight Mafell Guide Rail System (the rails, connecting pieces and clamps are themselves quite transportable in the Guide Rail Bag accessory). Side-by-side scales on the saw indicate the cutting depth whether on or off a track. Or add the accessory Guide Track 400 to convert the K65cc into the KSS 60cc Cross-Cutting System! Lengthwise the KSS 60cc is able to cross-cut a full 16” on its world-class track, with adjustable smart stops allowing for miter cuts up to 60° in either direction, plus the track is wide enough for the user’s left thumb to properly hold the track at all times. Perfectly-sized blades and a unique tilting system help this saw cut 2-3/8” deep at 0° and 1-13/16" deep at 45° when on a track. Mafell’s Cross-Cutting Systems are revolutionizing jobsites with their balance of power and portability.
Like any Mafell circular saw, the K65cc has all the features one would expect from the best 21st century German engineering: variable speed motor, fast and safe blade change, easy depth and tilting adjustment, exceptional dust removal, precise depth stop settings, and superior riving knife/splitter technology. Every part is composed of the most durable materials, making the K65cc a reliable 20-30+ year investment.
There are two versions of the K65cc to choose from: with or without the T-MAX carrying case.
Specifications
- Cutting depth at 0° off track: 0 to 2-5/8"
- Cutting depth at 45° off track: 0 to 2-1/16"
- Cutting depth at 0° on track: 0 to 2-3/8"
- Cutting depth at 45° on track: 0 to 1-13/16"
- Tilt range: 0 to 45°
- Saw blade diameter: 7-1/4"
- Nominal speed - no load: 2,700 to 4,700 rpm
- Motor: 120 V / 60 Hz
- Current: 14 A
- Weight: 10.6 lbs
Standard Equipment
- 24T Cross-Cutting Carbide Blade
- Parallel Guide Fence
- Allen Key
- 13.1 ft Cord
Accessories
- For 10-foot square or diagonal cuts, add one Guide Rail Set + Connecting Piece + Angle Fence
- For each additional 10 feet, add one Guide Rail Set + Connecting Piece
Uses:
- Cross-cutting hardwoods
- Ripping softwoods
- Cutting plywood sheets
- Trimming laminate flooring
- Sizing veneer panels
- Cutting MDF boards
- Slicing through particle boards
- Making joinery cuts in cabinetry
- Cutting slots for shelving
- Trimming doors to size
Download Brochure PDF
