Avoid kickback on table saws.
The MJ SPLITTER Steel Pro easily installs on your table saw’s zero clearance insert, replacing the riving knife. It keeps your workpiece tight to the fence to prevent burning, and keep the kerf from pinching the blade, virtually eliminating kickback.
Steel core for ultimate stability and strength.
- Package includes (4) SPLITTERS, a drill guide, and a 5/32” drill bit.
- Designed for 3/32" thin kerf saw blades
- SPLITTERS are reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009”
- Kerf range: 0.090 - 0.118”.
- For 90 degree thru-cuts only.
Better protection, better cuts.
The included precision drill guide aligns your drill with the dead center of your kerf by registering off of the kerf itself.
SPLITTERS are used in tandem to fill entire kerf.
To account for runout, the package includes 4 SPLITTERS with built-in offsets from the center of the kerf. Each side has an offset in increments of .003” to ensure a perfect fit.
The offset and orientation of the SPLITTERS can be adjusted to ensure that the kerf remains open.
Specifications:
- Included in the box:
- (4) Thin Kerf Splitters
- (4) Kerf Keepers
- Drill Guide
- 5/32" Drill Bit
- Screws
- Weight: 0.45lbs
- Package Dimensions: 9.0" x 7.5" x 1.0"
- Offsets: Reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009”
- Kerf Range (Table Saw): 0.090 - 0.118” (kerf), 90º cut angle
- Requirements: Table Saw; Zero-clearance insert with at least 2" behind blade at highest point
- SKU: SP-2TK
- UPC: 815267010262
- Country of Origin: Designed and made in the USA
- Tariff Code: 8466.20
- Patent #: 7,475,621 ; 7,784,385 B2
Download Manual Instructions
Preventing Kickback on a Table Saw with MJ SPLITTER SteelPro by MICROJIG
Using MJ Splitters with Phenolic Zero-Clearance Throat Plates
