Mini Insert Spoilboard Surfacing, Rabbeting, Flycutter, Slab Leveler, Flattening, Surface Planer and Bed Skimming Router Bit with Scorers 2 + 2 Design

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  These tools are also suitable for router sled machines, Make sure that your router sled is fully stable and squared.

  Re-Ordering Insert Knives List

  Included with Bit Solid Carbide Insert Knives,
  Optimal for cutting MDF

  Optional General Purpose/Solid Wood 
  Solid Carbide Insert Knives

  Optional *DLC Coated Insert Knives,
  Optimal for cutting Solid Wood

  
  RC-2239, RC-2249, RC-2250 and RC-2253
  Sides: HMA-12 (2) 12 x 12 x 1.5mm
  Bottom: HCK-70 (2) 14 x 14 x 2mm

  RC-2247
  Sides: RCK-450 (2) 10.5 x 10.5 x 1.5mm
  Bottom: RCK-452 (2) 10.5 x 10.5 x 1.5mm

  
  RC-2239, RC-2249, RC-2250 and RC-2253
  Sides: AMA-12 (2) 12 x 12 x 1.5mm
  Bottom: RCK-70 (2) 14 x 14 x 2mm
  
  
  Gen Purpose currently not available for RC-2247

  
  

  RC-2239, RC-2249, RC-2250 and RC-2253
  Sides:
  AMA-12-DLC (2) 12 x 12 x 1.5mm
  Bottom:
  RCK-70-DLC (2) 14 x 14 x 2mm
  
  DLC currently not available for RC-2247

  *Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.

  
  Re-Ordering Torx® Screw and Torx® Key List

  Included Torx® Screw

  Included Torx® Key

  
  RC-2239, RC-2249, RC-2250, RC-2253
  Sides: 67115 (2)
  Bottom: 67155 (2)

  RC-2247
  Sides: 67115 (2)
  Bottom: 67123 (2)

  
  
  Sides: 5005
  Bottom: 5015

  
  

  Sides: 5005
  Bottom: 5090

  
  

  
  

  MDF-Grade solid carbide insert knives included. Optional general purpose knives available below. 
  
  Mini insert spoilboard surfacing & rabbeting with scorers, great for cutting tight corners. Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Engineered with an Amana-exclusive carbide grade for the highest quality of cut, maximum cutting efficiency, and faster material removal process. Also known as a Surface Planing, Rabbeting, Flycutter, Fly Cutter, Leveler and Bed Skimming Router Bit.

  Perfect for:
  
  

  • Resurfacing & Flatten spoilboards using CNC
  • 2+2 spoilboards contain two bottom scorers for better performance, finer surface finish and better clearance for 90? corners
  • Planing, flattening large glued up panels using CNC
  • Surfacing and finishing wood using timber slab machines
  • Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.
  • Rabbeting or slotting

  Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.
  
  

   

   

  These industrial router bits come complete with four (4) MDF-Grade solid carbide insert knives, each with four (4) cutting edges that allow users to rotate the knife when one side becomes dull. Designed for spoil boarding, planing & rabbeting the following materials:
  
  

  • MDF 
  • Fiberboard
  • HDF/LDF
  • High Density Urethane (HDU Board)
  • Balsa Core*

  • Plastic/Acrylic**
  • Plywood/Chipboard*
  • Solidwood/Softwood*
  • Ultra-High-Molecular-Weight Polyethylene (UHMWPE)

  *For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 and #RCK-70 (sold separately).

  **Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.

  Max RPM = 24,000.

   

  Recommendations: For surfacing solid woods it is recommended to remove both bottom scorers.

   

  Note: This tool is not designed to plunge! You must ramp down to a depth of 1/4" deep over a 20" run. Use the max RPM allowed and start with the feed rate (from the speed and feed chart), and go up until you get waves, then back down to a smooth cut/finish.
• Reviews
• Questions and Answers
• Videos

  CNC Foam Board Cast Making for Concrete Coffee Table

  Resurfacing Spoilboard for Your CNC Machine

  Natural Art" Created using insert surfacing CNC router bit

  Mini Insert spoilboard #RC-2250 In-Action!

  Frog Table CNC Project using Spiral 'O' Flute Bits

  View closeup images of CNC frog table project
• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.