Solid Carbide Spektra™ Extreme Tool Life Coated Single 'O' Flute, Plastic Cutting Router Bits
Used for routing harder and more rigid plastics in the following materials: Acrylic, Acetal, Nylon, PVC, ABS, Phenolic, Corian, Poly (methyl methacrylate) (PMMA), Acrylic Stone, Coroplast®, etc.
Amana Tool® Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.
- nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
Excellent for cutting:
- Plastic
- Acetal
- Acrylic
- Acrylic Stone
- Acrylonitrile Butadiene Styrene (ABS)
- Alupanel®
- Copolymer
- Corian
- Coroplast®*
- Corrugated Polypropolyene
- Delrin®
- Ethylene-Vinyl Acetate
- Foam Board
- Fomex®
- Gatorfoam®**
- High Density Polyethylene (HDPE)
- High Impact Polystyrene (HIPS)
- High Pressure Laminates (HPL)
- Hydroxy-Terminated Polyether (HTPE)
- Low Density Polyethylene (LDPE)
- LubX®
- Lucite
- Mechanical / Engineered Plastics
- Nitrile Rubber
- Nylon
- Perspex® Cast Acrylic Sheet
- Phenolic
- Plexiglas®
- Polyethylene (PE)
- Polyethylene Terephthalate (PET)
- Polyethylene Terephthalate Glycol (PETG)
- Poly (methyl methacrylate) (PMMA)
- Polycarbonate
- Polypropylene (PP)
- Polyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde
- PVC
- Sign Foam
- StarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)
- Styrene-Acrylonitrile
- Styrene-Butadiene Rubber (SBR)
- Styrene-Isoprene-Styrene (SIS)
- Teflon
- Thermoplastic Polyolefin (TPO)
- Ultra High Molecular Weight Polyethylene (UHMWPE)
- Urethane
* Coroplast® is soft plastic cardboard made with super soft, super flexible PVC.
** Gatorfoam® Foam Board, a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.
