Everyone who has wrangled a full sheet of plywood around a table saw immediately recognizes the advantages of track saws for breaking down sheet goods. Keeping the unwieldy sheet stationary and moving the saw down a precision-made rail makes a lot of sense, but how do you get two (or more) pieces to come out exactly the same width? Just like the rip fence on a table saw, Woodpeckers Parallel Guide System takes measuring and marking out of the equation and uses a physical reference to ensure your last cut is exactly the same as your first. The Parallel Guide System locks onto your Festool, Makita, Milwaukee or Triton guide rail and instantly aligns the cutting line parallel to, and a specific distance from, the edge of your stock.
The Parallel Guide System starts with Woodpeckers Dual Purpose Track. The T-track connects to your saw’s guide rail with a precision-machined bracket that locks in square and secure. With two T-tracks locked to your guide rail, all you have to do is set the zero side-play flip stops to the same dimension, position the stops on the edge of your work and make your cut. Repeat as often as needed…every piece will be exactly the same.
The Parallel Guide System shines when working on large cabinet or furniture panels, but what about smaller pieces? We’ve got that under control, too. Add the Narrow Stock Guides, use the scale on the edge instead of the top, and now you can rip stock from 10-1/2" down to just a fraction of an inch. This feature is really great when you’re on a job site without a table saw and need to make some frame stock immediately, or if your shop space is so limited a table saw is out of the question.
The T-tracks come in sections. Use all of them or just the ones you need. Fully assembled, you can rip up to 52" – well beyond the center of a sheet of plywood. But, when working normal cabinet components, you’ll only need a couple sections assembled. The ends are precisely cut to ensure the connected sections are perfectly straight and the scale calibrations are accurate.
This former OneTIME Tool is now part of our permanent product line-up. Like all Woodpeckers products, the Parallel Guide System is proudly machined and carefully inspected in Strongsville, Ohio manufacturing facility, just south of Cleveland.
Additional Info
- Breaking down large sheets of plywood into smaller, manageable pieces
- Creating multiple pieces of the same width from sheet goods, ensuring consistency in project components
- Making precise, parallel cuts without the need for measuring and marking each piece
- Working on large cabinet or furniture panels where precision and repeatability are crucial
- Ripping narrow stock from 10-1/2" down to very small widths, ideal for frame stock or when working in tight spaces
- Adapting to job site conditions where a table saw is not available, providing a portable solution for precise cuts
- Maximizing workshop space by eliminating the need for a table saw for ripping sheet goods or narrow stock
- Ensuring straight, accurate cuts across various lengths, up to 52", suitable for a wide range of project sizes
- Enhancing the capability of Festool, Makita, Milwaukee, or Triton guide rails with a precise, easy-to-use attachment
- Maintaining project quality with perfectly straight connections and accurate scale calibrations for consistent results
Download Manual Instructions
Parallel Guide System
Repeatable Rip Cuts with Track Saw
This Track Saw Accessory Might Replace Your Table Saw | Deep Dive
