Turn your palm sander into a versatile stationary sander in seconds with Woodpeckers SandStand Tilting Sander Base. When the workpiece is relatively small, it's easier and safer to hold onto the work instead of holding onto the sander. But stationary belt and disc sanders take up lots of shop space, are a sizable investment and can be overly aggressive and intimidating to use on a small workpiece. SandStand secures almost any round-bodied palm sander in a tilting base you can mount to any workbench. You can even mount it on a wall if you need to. Now you have both hands to control the workpiece as you guide it over your sander. Adjust the angle of the base to hold the sander at the most comfortable position for the job at hand…anywhere between horizontal and vertical.
SandStand works with any sander that has a round section of its body that measures between 2" and 3-5/8" in diameter. Just find the location on your sander where the clamping bar fits best and leaves the controls accessible. SandStand’s flanges have cut-outs to bolt it down or you can just clamp it to your workbench. Once you have the sander mounted and the SandStand secured, adjust the angle where you want it and start sanding!
You can easily add a table to your new “mini disc sander.” Just make a simple 4-sided box and clamp it in front of your SandStand mounted sander. Now you can sand contoured and straight edges and keep them dead square to the face.
We designed SandStand to work with just about any sander out there… new, old, fancy or plain… if it has a round or “roundish” body it most likely will work with SandStand. The powder-coated steel frame holds your sander solidly and stands up to rugged use.
Like all Woodpeckers tools, the SandStand is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland).
- Country of manufacture: United States
Additional Info
- Transforming a handheld palm sander into a stationary sander for enhanced control and precision on small workpieces.
- Freeing up both hands to manipulate the workpiece for safer, more detailed sanding operations.
- Adjusting the sander angle for ergonomic use, reducing strain on the user during prolonged sanding tasks.
- Mounting on workbenches or walls to save space in a workshop and keep the work area organized.
- Creating a makeshift mini disc sander by adding a simple table, allowing for precise sanding of contoured and straight edges.
- Utilizing with a wide range of sanders, including older models or those with unique shapes, due to its adaptable clamping system.
- Ensuring durability and reliability in rugged workshop environments with its powder-coated steel frame construction.
- Enhancing the versatility of the workshop without the need for large, expensive stationary sanding machines.
WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Download Manual Instructions
SandStand Tilting Sander Base
SandStand FAQs | Deep Dive
Woodpeckers SandStand Production Update
