Amana Tool 48224-K SC Spektra Extreme Tool Life Coated Spiral Plunge 10mm Dia x 1 CH x 10mm SHK 3 Inch Long Down-Cut Router Bit for Drilling Shelf Pin Holes

PRODUCT DETAILS

Click an item to expand and learn more

• Overview

  Note: 48224-K is specifically designed with a 10mm diameter to plunge shelf holes using a CNC machine. System 32 holes are a popular standard in cabinetry, this system refers to holes that placed at 32 mm intervals. System 32 holes are most commonly used for shelf pin holes.

  
  

  
  

  specifically designed with a diameter to plunge shelf holes using a CNC machine.

   

  

  Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge Down-Cut Router Bits with special unique carbide with nACo® nanocomposite coating for longer lifetime in wood, plywood and laminate.

  Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut.

  The ‘Down-Cut’ cuts from the surface down leaving a smooth edge at the surface.

  Special unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

  Amana Tool Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.

  • nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

  Excellent for Cutting:

  • Laminate
  • Melamine
  • Melamine Particle Board

  • MDF
  • Veneered Plywood
  • Wood

  Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.

  WARNING! Due to the extremely small diameters involved, bits with smaller diameter of 1/8" are not guaranteed against breakage.

• Reviews
• Questions and Answers
• Downloads

  Tool No.

  CNC Feed/Speed

  Vectric .tool & Fusion .tools File

  AutoCad PDF/DXF File