Suitable for making the groove for Lamello® P-System with CNC router with 3 and/or 5 axis. RH Rotation.
Suitable for making Clamex P Connecting Fitting (Clamex P - Tenso P – Divario P) for furniture, shelves unit and Kitchen.
Excellent for grooving corner and longitudinal joints on:
- Hard Wood
- Veneered MDF
- Laminated MDF
Polycrystalline Diamond (PCD) Tipped. Diamond is the hardest material on the earth. PCD tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate, which allows the diamond to be brazed onto a tool body. If you’re looking for the ultimate in tooling, you’ve found it! The cutting edge lasts much longer than carbide for extremely long life.
PCD Tooling Benefits:
- Harder cutting edge provides higher resistance to wear
- Cut thousands of feet more than carbide without changing tool, saving setup time
- Optimized machine tool efficiency
- Quality of finish is often significantly improved
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
