Free Shipping
PRODUCT DETAILS
Click an item to expand and learn more
-
Functions
Power and precision in the palm of your hand
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.
- When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
- Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
- Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
Product Details
-
Power
The TS 75 is our most powerful plunge cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
-
Depth Of Cut
At 2 3/4 inch depth of cut, the TS 75 can power through thick stock with ease.
-
Slip Clutch
A perfect cut the first time, every time, with laser-straight, splinter-free cuts.
-
Guide rail precision
The TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts.
-
Scribe Line = Cut Line
Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback, leaving you in control of the operation.
-
Riving knife
Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.
-
MMC Electronics
Blade changes are easier and safer using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.
Technical Data
Specifications
- Idle engine speed: 1 350 - 4 400 RPM
- Cable length: 4.00 m
- Min. dust extraction connection dia.: 1.06 in
- Saw blade diameter: 8-1/4” (210 mm)
- Drive type: Mains
- Cutting depth at 45°: 2-1/8” (55 mm)
- Dust extraction connection dia.: 1-1/16"/1-7/16" (27/36 mm)
- Power consumption: 1 600 watt
- Cutting depth: 0" - 3” (0 - 75 mm)
- Angular range: 0 - 47 °
Additional Info
- Creating precise, glue-ready edges on cut materials for seamless joins
- Cutting through solid doors to size or install hardware
- Truing rough lumber to prepare for fine woodworking projects
- Cutting out window frames with accuracy and ease
- Making matched panels by cutting stacked sheet goods in a single pass
- Achieving straight, splinter-free cuts when used with Festool guide rails
- Safe and easy blade changes with the FastFix system
- Maintaining control and safety with the spring-loaded riving knife that prevents kickback
- Cutting through thick stock effortlessly with a deep cut capacity
- Achieving accurate cuts along scribe lines, even on bevel cuts
- Adjusting saw speed to match different materials for optimal cutting performance
- Minimizing wear on the blade and motor with the slip clutch feature to protect against kickback
-
-
