Woodpeckers RF-FS-50-PM Rip-Flip Fence Stop System - 50 Inch Capacity - Fits Powermatic & Biesemeyer

Repeatable accuracy. Nothing makes work in the shop go smoother than a device that delivers repeatably accurate results. For years miter gauges, router tables and drill presses have used flip stops that give you repeatability when you need it, get out of the way when you don’t and are always ready to come right back to work. Woodpeckers new Rip-Flip Fence Stop System takes the precision and convenience of the flip stop somewhere it’s never been before… your table saw rip fence. Whether you have a specific dimension that you use day in and day out (rail and stile stock width, for example) or need to save a critical dimension during just one project, the Rip-Flip will return your rip fence to the exact same position time and time again.

To use a Rip-Flip Stop, just flip it up, slide the fence until it contacts the brass tip of the stop and lock your fence. It’s that easy. The large knurled brass knob and locking thumbwheel make micro-adjusting and locking quick and accurate. The stops are symmetrical, so they can be set up to contact the left side of the fence or the right, the choice is yours and it takes just seconds to flip a stop from one side to the other. 

We weren’t satisfied with just adding flip-stop convenience and precision to the rip fence. We took it to the next level by coupling two stops together to produce perfect fitting dadoes. Stop hassling with repeated trial-and-error attempts to get just the right combination of chippers and shims. Simply assemble your dado stack to at least half the width of your finished dado. Then, with a few turns of the micro-adjuster you can fine tune a perfect fitting dado by making two cuts; one against each stop.

We’re not done. Now that you have the dado dialed in for a perfect fit, the coupled stops can be repositioned anywhere along the rail and the dado will remain exactly the same without ever readjusting anything. Think about fitting multiple shelves in a cabinet. Just slide the fence and the coupled pair of stops to wherever you want a shelf and the dado width is perfect and automatic. 

The Rip-Flip for Powermatic/Biesemeyer fits new and old versions of the Powermatic “Accu-Fence”, new and old versions of the Biesemeyer T-Square Fence and most “clones” of the Biesemeyer. If your table saw fence clamps to a 2" x 3" rectangular tube, the Rip-Flip will more than likely fit. We’ve looked at dozens of different T-Square style fences and have come up with adapters and brackets that will work with the vast majority of them. We’ve included all the pieces and parts into the Powermatic/Biesemeyer version of the Rip-Flip. Integrating the Rip-Flip System with your table saw takes just a few minutes. It won’t affect the alignment of your rip fence rail and doesn’t require removing any original parts. Once the track is installed, you can position the Rip-Flip Stops anywhere along the rail, in any combination of right, left or coupled stops.

The Powermatic/Biesemeyer Rip-Flip Fence Stop System is available in 30” and 50” sizes. It includes all the adapters and brackets to make the fence work with almost all T-Square style fences, anodized aluminum track, two Rip-Flip Stops and one dado Coupling Pin. Flip Stops and Coupling Pins are available separately and we offer a pair of Flip Stops complete with a Coupling Pin as a bundle.

Like all Woodpeckers products, the Rip-Flip Fence Stop System is precisely machined and carefully inspected in Strongsville, Ohio manufacturing facility (just south of Cleveland).

NOTE: The “Powermatic” “Accu-Fence” and “Biesemeyer” brand names are the registered trademark of their respective companies and are not associated with Woodpeckers, LLC.

Additional Info

• **Creating Consistent Cuts**: Ideal for projects requiring repetitive cuts of the same dimension, such as multiple shelf pieces, ensuring each piece is cut to the exact same size without the need for manual measurement each time.
• **Efficient Cabinet Making**: Streamlines the process of fitting multiple shelves within a cabinet by allowing for the quick repositioning of the fence and stop system to make perfect dado cuts for shelf insertion.
• **Enhanced Woodworking Projects**: Improves the accuracy and quality of woodworking projects by providing a reliable method to make precise cuts, leading to better-fitting parts and a more professional finish.
• **Time-Saving in Workshop**: Saves time in the workshop by reducing the need for trial-and-error measurements and cuts, especially when working on complex projects or producing multiple pieces of the same dimensions.
• **Versatility in Applications**: Can be used for a wide range of woodworking projects beyond cabinets and shelves, including picture frames, door frames, and any project requiring precise and repeatable cuts.
• **Custom Furniture Making**: Essential for custom furniture makers looking for precision in creating components that fit together perfectly, enhancing the overall quality and durability of the finished product.
• **Educational Tool**: Useful in educational settings such as vocational schools and woodworking classes, teaching students the importance of precision in craftsmanship and how to achieve consistent results.
• **Home Improvement Projects**: Aids in home improvement projects requiring wood cutting, such as creating custom storage solutions, fitting trim, or any DIY project needing precise measurements and cuts.
• **Professional Carpentry**: A valuable tool for professional carpenters to increase efficiency and accuracy on job sites, ensuring client satisfaction with high-quality workmanship.