CNC Spiral O Single Flute, High Speed Steel (HSS) Aluminum Cutting ZrN Coated Up-Cut and Down-Cut Router Bits

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  WARNING! Due to the extremely small diameters involved, bits with smaller diameter of 1/8" are not guaranteed against breakage...

  
  

  High Speed Steel (HSS)

  Up-cut tools provide clean finish on the bottom of the material that has been cut. Down-cut tools are recommended when chip removal is directed down to protect the finish of the top of the material that has been cut. Upcut bits eject the chips upward, downcut bits eject the chips downward.

  To be used only on CNC machines and routers with automatic feeding. The spiral ‘O’ flute sharpening/finishing process increases feed rates, allowing for more linear feet routed in less time.

  Benefits of ZrN Coating:

  • Creates incredibly precise detail work
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles
  • Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting

  • PVD ceramic hardcoat designed for soft, gummy and abrasive materials
  • High aspect ratio for single pass deep-reach cutting
  • High flute volume supports high feed rates and chip loads. Has the ability to run and/or be spun much faster than uncoated tools
  • Flute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites

  Excellent for cutting:

  • ALPOLIC® Copper Composite Material (CCM)
  • Alucobond®
  • Aluminum
  • Aluminum 5052
  • Aluminum 6061
  • Aluminum Alloys (Al-Alloy)
  • Aluminum Composite Materials (ACM)
  • Aluminum Composite Panel (ACP)

  • Alupanel®
  • Brass
  • Copper
  • Dibond®
  • Durabond*
  • e-panel™
  • Etalbond®
  • Fomex® with Aluminum Face

  • Gold
  • Non-Ferrous Metals
  • Plastic
  • Silver
  • Solid Surface
  • Titanium Composite Material (TCM)
  • Wood

  *Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side. It is a pre-finished product that requires no decoration.

  These router bits are specifically designed for a variety CNC machining applications. Continuous improvements in cutting performance, the unique carbide polishing process, tool design & geometry make these router bits perfect for routing signs and displays. Signmaking (signcrafter) router bits were originally developed in Europe specifically for professional sign makers. Today, CNC routers have become the tool of choice for sign makers, moving beyond printers and vinyl cutters.

  • Industrial quality
  • Single flute design
  • Super high flute mirror finish results in better cut quality

  • Dissipates heat well and prevents melting
  • Right hand helix/right hand cut
  • Longer tool life

  WARNING! Never attempt to cut ferrous metals with these bits. Inspect cut quality and adjust feed / speed accordingly. For optimal results and extended tool life use mist lubricant system or air cooling.

• Reviews
• Questions and Answers
• Videos

  How to Make a CNC Floor Inlay - Short Version