Ditec 2000 Conical Type Scoring Sets

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  Note: #DT200T36-80A is replaced by #DT200T36-20A
  
  Note: Please specify if your application requires 22mm, 30mm, 45mm bore, etc. Due to many different scoring machine sizes (particularly arbor sizes), it is advisable to measure both the scoring and main blades that are presently on your machine (diameter, bore, kerf, etc.).

  Dynamically balanced saw blades ensures saw blade stability for a clean cut. Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type scoring blades, the kerf width changes with depth of penetration. Used in combination with Amana Tool's® industrial saw blades '7' series only (#714721, etc.). Also used in combination with the new Amana Tool® Ditec 2000™ series panel saws. Kerf range should match the main blade. With longer lasting Ditec™ carbide tips.
  
  Carbide-Tipped
  
  

  Instructions for grinding:

  • For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.

  • Damaged teeth can be replaced, however, replacing of a large number of teeth will, of course, shorten the life of the saw blade.

  • Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

  Safety Guidelines for Saw Blades. 
  
• Reviews
• Questions and Answers
• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.