CNC Cabinet Making Sets with 5mm and 1/4 Inch Dia Shelf Pins, 1/4 Inch Shank

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  Set includes THE ONLY Spektra™ Coated Bits – Made in the USA  

  AMS-332 Cost of 3 bits Purchased Individually	$133.76
  Set Selling Price	$126.71
  Buying the Set you Save	5%

  AMS-334 Cost of 3 bits Purchased Individually	$140.81
  Set Selling Price	$133.77
  Buying the Set you Save	3%

  CNC Cabinet Making available with both 5mm Dia Shelf Pins and 1/4" Dia Shelf Pins 

  For Cabinet Makers!

  Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life (#201005 and #201007) 

  Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.

  Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

  Solid Carbide Spektra™ Extreme Tool Life Coated (#46202-K, #46700-K, #46211-K)

  Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling. Special unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and flawless compression cuts. Particularly suitable for double-sided melamine or laminated material.

  • nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
    
    Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.

  Excellent for cutting:

  • Laminate, Plywood & Wood (46202-K, 201005 and 201007 only)

  • Baltic Birch Plywood (46700-K only)
  • Cork

  46202-K Down-cut for cutting dados (joinery and/or interior shelf slots).
  46700-K Cutting profiles (Cutting outside of cabinet parts, doors and/or drawer fronts).
  47636 1/4" to 10mm CNC dowel drill adapter
  46211-K Down-cut for drilling 5mm shelp pin holes
  201005 (5mm dia.) & 201007 (1/4" dia.) boring bit with 10mm shank to use with drill adapter, for shelf pin holes
  
  

• Reviews
• Questions and Answers
• Products Included

  Set #AMS-332-K Includes the Following Tools:

  Tool No

  Description

  Product Page

  46202-K

  CNC Solid Carbide Spektra™ Extreme Tool Life Coated Compression Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit

  View Details

  46700-K

  CNC Solid Carbide Spektra™ Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit for Birch Plywood

  View Details

  46211-K

  CNC Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge 5mm Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit for Drilling Shelf Pin Holes

  View Details

  
  

  Set #AMS-334-K Includes the Following Tools:

  Tool No

  Description

  Product Page

  46202-K

  CNC Solid Carbide Spektra™ Extreme Tool Life Coated Compression Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit

  View Details

  46700-K

  CNC Solid Carbide Spektra™ Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit for Birch Plywood

  View Details

  201007 with 47636

  201007 Carbide Tipped Brad Point Boring Bit R/H 1/4 Inch D x 57mm Long x 47636 10mm Shank with Dowel Drill/Boring Bit Adapter for CNC Standard Collet/Tool Holder

  View Details View Details
• Videos

  Carbide Tipped Boring Bits - In Action!

• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.