WARNING! Due to the extremely small diameters involved, bits with smaller diameter of 1/8" are not guaranteed against breakage.
Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge Up-Cut Router Bits with special unique carbide with nACo® nanocomposite coating for longer lifetime in wood, plywood and laminate.
Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut.
The ‘Up-Cut’ shears from the bottom up pulling chips from the bottom up thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising.
Special unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard plywood and laminate.
Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.
THE ONLY Spektra™ Coated Bits – Made in the USA 
Amana Tool® solid carbide router bits provide consistent, repeatable quality. Every tool is guaranteed to match the geometry on the prints, every time on every order. Best control of carbide grades for woodworking, and absolute control of quality standards on all carbide blanks.
Amana Tool Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.
- nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Excellent for Cutting:
- Cork
- Laminate
- Melamine
- Melamine Particle Board
- MDF
- Veneered Plywood
- Wood
Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Making a Kitchen Countertop CNC Epoxy Salvage Slab | ToolsToday
How to Make: Sunflower Catch All Tray on CNC
How to Make: Step Stool on CNC
How to Make a Snowman Catchall Tray on the CNC
Making a Cart for my Pantorouter Machine
